Kumar, NishantNishantKumarGupta, Hari ShankerHari ShankerGuptaSrivastava, AnujAnujSrivastavaMohapatra, Nihar RanjanNihar RanjanMohapatra2025-08-312025-08-312024-01-01[9798350330991]10.1109/ISCAS58744.2024.105582102-s2.0-85198516328https://d8.irins.org/handle/IITG2025/29190This paper proposes a dead-time control circuit to generate independent and adaptive delays for the rise and fall time duration. The circuit comprises a rise/fall time detector, rise/fall time to voltage converter and switch capacitor-based charge integrator block to generate the adaptive dead-time. The proposed adaptive dead-time controller design implemented using a 0.18μm HV CMOS process, occupies 170μm x 90μm silicon area. The results show good accuracy in the dead-time generation with an error <±3.5ns. In post-layout simulation, the design provides sinusoidal output with a very low offset voltage of 70mV.falseCryo-Cooler | Dead-time controller | Hard switching loss | High Voltage (HV) Device | Infra-Red (IR) | Shoot-through | Zero Voltage Switching (ZVS)Conference Paper20241cpConference Proceeding0